[CA] [CA11] Power cable for Quantum

[Chuck - Raymarine - Moderator]

Pete,

Q1) The supplied Quantum power cable (A80309) will have bare ends going into the arch/boat. The cable diameter will be....?"
A1) Quantum Power Cable diameter (0.3")

Q2) A Raynet to Raynet cable would be the second cable. If I only need 5 meters this would be A80005, and would measure as follows:
- cable diameter: 0.230"
- RayNet plug diameter: 0.710"
- RayNet plug length: 1.680
A2) Yes.

Q3) The A80277 Quantum data cable. I can't find the specs as far as the diameter of the cable and diameters and lengths of the end pieces. Can you help me with that?
A3) Quantum Data Cable
- diameter: 0.250"
- RayNet plug (each end): diameter: 0.710"

Q4) As a reply to my reply, I think my confusion lies in the fact that I can find data for the Digital Radar Cable (that's the combined data and power), and the Raynet to Raynet cable, but I can't find any specific info on the "Quantum Data Cable" and/or how it differs (?) from a Raynet to Raynet cable in function or dimensions. A4) Functionally speaking, the Quantum Data Cable and RayNet cables are interchangeable. The Quantum Data Cable features a heavier sheath than the RayNet cables.

Q5) If I can't make the Y connector and Digital Radar Cable combo fit my installation, then I'll be using the Quantum Power Cable that came with my Q24C and.....the A80274? Or the A80005? Are these interchangeable? If so, does one or the other have one smaller end (for chasing), or?
A5) See the response to Q4, the RayNet plugs of these cables are identical.