The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] Depth Transducer causing no data

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Depth Transducer causing no data
07-22-19, 01:06 PM (This post was last modified: 07-29-19 10:03 AM by Chuck - Raymarine - Moderator.)
Post: #1
[email protected] Offline
Junior Member
**
 		Posts: 1
Joined: Jul 2019
Reputation: 0
[CA11] Depth Transducer causing no data
All of my 4 I70 instruments, though on, would not display any data. They only display three dashes instead of numerals, or no arrow for the wind direction. Would a severely fouled depth transducer cause this? What would be the cause? I replaced the network terminators thinking that might be it, but no luck. The SeaTalk lights are flashing green, and the power is showing a red light. See attachment.


Attached File(s)
.mov  94F793CD-54E9-442A-910A-1B05EEF1DEFF.MOV (Size: 1.28 MB / Downloads: 203)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Depth Transducer causing no data - [email protected] - 07-22-19 01:06 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication