The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] New EVO Autopilot work with RL80C?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New EVO Autopilot work with RL80C?
07-24-19, 08:11 AM (This post was last modified: 07-29-19 03:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
truk911 Offline
Junior Member
**
 		Posts: 1
Joined: Aug 2018
Reputation: 0
[CA11] New EVO Autopilot work with RL80C?
I have a 2001 Sea Ray 400 Sedan Bridge with RL80C Display and 4' Open Array Radar, Tri-Data, GPS and an ST7000+ autopilot which is all original to the boat. All of it works great but the autopilot has been having issues that I've tried to correct. I would like to replace just the autopilot, is that possible? If so, what do I need to make it work with my old equipment?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New EVO Autopilot work with RL80C? - truk911 - 07-24-19 08:11 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication