Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?
07-29-19, 02:28 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"...
Welcome to the Raymarine Forum Ray18,

Engines should not be interfaced to marine electronics in the manner which you have suggested. An engine gateway should be used. Please click here to view a FAQ addressing this subject. The ECI-100 is one such engine gateway which supports integration with Yamaha engines. When operating with LightHouse 3 v3.10.39 or later software, compatible Yamaha Command Link or Command Link Pro network is connected to the MFD via a Yamaha NMEA 2000 gateway (6YG-8A2D0-00-00) or CL7 Gauge may be installed to support use of the LightHouse 3 Yamaha app. More information on this app may be found within Chapter 13: Yamaha app of the LightHouse 3.10 Advanced Operation Instructions
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"... - Chuck - Raymarine - Moderator - 07-29-19 02:28 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication