Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] No Speed 0or Temp from DST800 Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] No Speed 0or Temp from DST800 Transducer
07-31-19, 04:04 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] No Speed 0or Temp from DST800 Transducer
Welcome to the Raymarine Forum John,

It is recommended that the speed/temp transducer elements be tested with a common multimeter. Please click here to view a FAQ addressing how one may test a speed through water transducer. Please click here to view a FAQ addressing how one may test a temperature. The design of the iTC-5 requires that temperature be detected to then permit it to detect speed. Should either speed or temperature transducer tests fail, then the transducer should be replace.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] No Speed 0or Temp from DST800 Transducer - Chuck - Raymarine - Moderator - 07-31-19 04:04 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication