[CA] [CA11] Axiom Pro RVX to E97 Transducer

[Chuck - Raymarine - Moderator]

firstin,

The A66090 variant of the B744V fishfinder transducer belongs to a family of transducers which are commonly referred to a A-Series Fishfinder Transducers. The A66090 variant of the B744V fishfinder transducer is designed to be directly interfaced to the fishfinder Transducer socket of the following products:
- eSx7 eS-Series MFDs
- e7D/ex7 e-Series MFDs
- cx7 c-Series MFDs
- ax7 a-Series MFDs
- A50D/A57D/A70D A-Series Classic MFDs
- DS400X/DS500X/DS600X Fishfinders

The A66090 variant of the B744V fishfinder transducer may also be adapted to be mated to the fishfinder Transducer socket of the following products:
- Axiom DV MFDs
- Axiom RV MFDs
- CP370 Fishfinder Sounder Module
- CP300 Fishfinder Sounder Module
- DSM30/DSM300 Fishfinder Sounder Module

A-Series Fishfinder Transducers cannot be successfully adapted to be mated to the 1kW Transducer socket of an Axiom Pro RVX MFD or RVX1000 Fishfinder Sounder Module. Accordingly and as you have indicated that this transducer has previously functioned correctly with your CP370 and should the CP370 be available, then it would be recommended that the CP370 be interfaced to the system featuring the Axiom Pro MFDs. Alternatively and should one desire to have a 50kHz/200kHz fishfinder transducer connected to the 1kW Transducer socket of the Axiom Pro RVX MFD or RVX1000 Fishfinder Sounder Module, then it would be recommended that a fishfinder transducer which is designed to be directly interfaced to a CP370 (ex. A66091 B744V, etc.) be installed in place of the currently installed A66090 B744V fishfinder transducer.