Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?
08-08-19, 12:34 PM (This post was last modified: 08-08-19 12:36 PM by Chuck - Raymarine - Moderator.)
Post: #4
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"...
ray18,

Q. So i only need either ECI-100 gateway or Yamaha Gateway box 6YG-8A2D0-00-00 to make my Axiom 9" MFD to display my 2019 Yamaha F70 hp engine data work, but not both gateways?
A. Correct. However, should you desire to use the Yamaha app referenced above, then a Yamaha NMEA 2000 gateway (6YG-8A2D0-00-00) or CL7 Gauge would be required.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"... - Chuck - Raymarine - Moderator - 08-08-19 12:34 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication