Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9" MFD?
08-09-19, 09:31 AM
Post: #5
ray18 Offline
Member
***
 		Posts: 91
Joined: Feb 2017
Reputation: 0
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"...
ok i drew a diagram to use ECI-100 to read my new 2019 Yamaha F70 engine data from my Axiom 9" MFD which has a NEMA2000 female port.
These are the parts I plan to buy, but I don't know what to buy to connect SeaTalkng A06040 spur cable to Axiom 9" MFD? I was thinking buying A06046 to connect to Axiom 9" MFD but unsure whether A06046 can connect to A06040?

1. Yamaha Bus pigtail cable.
2. Yamaha Command Link hub.
3. Raymarine Yamaha command link (plus) cable.
4. Raymairne ECI-100 with E70227 cable.
5. Raymarine SeaTalkng starter kit.
6. Raymarine A06046?

Please see my diagram - using Raymarine ECI-100 to display Yamaha F70 engine data on a Raymarine Axiom 9" MFD.
http://www.youtube.com/njfishing1 - from Captain Steve
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] How to get my new Yamaha F70 outboard rpm. etc. engine data to Axiom 9"... - ray18 - 08-09-19 09:31 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication