[LW] [LW11] Axiom 7 and AIS

[Stefan]

I have the exactly same MiniPlex 3 unit that receives AIS messenges via NMEA 0183 from my AIS. All you have to do is to configure the NMEA 0183 input port on your MiniPlex 3 to 38400 baud. You can also with the same sw to verify the AIS input. The MiniPlex manual have many details to describe the handling and setup.

I get up all AIS information via N2k/STNG on my Axiom 7. Its not possible to send a NMEA streem out on WiFi from any Rarmarine MFD, therefore you have to use the WiFi from your MiniPlex instead. My MiniPlex sends out all my boat data in a NMEA0183 streem so I can get all boatdata into my tablet and mobile phone. Its bad that the Axiom units that have WiFi not have the capability to send out NMEA data via WiF, you can only mirror or control the screen on the Axiom MFD.