[CA] [CA11] EVOLUTION Auto Pilot, point of confusion
|
08-21-19, 06:22 PM
(This post was last modified: 08-22-19 08:02 AM by Chuck - Raymarine - Moderator.)
Post: #3
|
|||
|
|||
RE: [CA11] EVOLUTION Auto Pilot, point of confusion
SO, looking at the FAQ, I have run a separate power cable and respective ground for the electronics. The new circuit is protected with a 40 AMP breaker, and each individual device has its own respective recommended fuse from the power buss bar. Should the electronics be switched off by their respective power switches when ending use, or just shut off the switch to the powered buss bar?
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] EVOLUTION Auto Pilot, point of confusion - tonyiiiafl - 08-17-19, 07:06 AM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - Chuck - Raymarine - Moderator - 08-21-19, 10:23 AM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - tonyiiiafl - 08-21-19 06:22 PM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - Chuck - Raymarine - Moderator - 08-22-19, 08:04 AM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - tonyiiiafl - 08-22-19, 12:06 PM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - Chuck - Raymarine - Moderator - 08-22-19, 03:58 PM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - tonyiiiafl - 08-22-19, 04:35 PM
RE: [CA11] EVOLUTION Auto Pilot, point of confusion - Chuck - Raymarine - Moderator - 08-23-19, 12:28 PM
|
User(s) browsing this thread: 7 Guest(s)