The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST7000 power usage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST7000 power usage
10-27-19, 03:40 PM (This post was last modified: 10-28-19 01:10 PM by Chuck - Raymarine - Moderator.)
Post: #1
rieraney Offline
Junior Member
**
 		Posts: 7
Joined: Mar 2018
Reputation: 0
[CA11] ST7000 power usage
I realize that autopilot power usage depends heavily on sea state, rig balance, etc, but there must be some starting place for figuring likely power draw of an ST7000 for my power budget. I have a 45' ketch at about 16 tons if that helps.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] ST7000 power usage - rieraney - 10-27-19 03:40 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication