[DG11] E120 MFD will not start

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[DG] [DG11] E120 MFD will not start

10-31-19, 11:27 AM (This post was last modified: 11-06-19 10:14 AM by Derek - Raymarine - Moderator.)

Post: #1

seeray96 Offline

Junior Member

Posts: 46
Joined: Jun 2016
Reputation: 0

[DG11] E120 MFD will not start

Getting ready to take the boat to winter storage, and turned-on the normal instruments, including (so I thought) the E120. It started, but would proceed only as far as the "Limitations on Use" screen. The "Press OK to continue" took me nowhere. I made sure the E120 was the last device to turn-on, avoiding (I think) a voltage drop.
I've used the E120 for quite a while (years) and never had this happen.

Note: the software is ver 5.69.

« Next Oldest | Next Newest »

Messages In This Thread

[DG11] E120 MFD will not start - seeray96 - 10-31-19 11:27 AM

RE: [DG11] E120 MFD will not start - Derek - Raymarine - Moderator - 11-06-19, 10:15 AM

RE: [DG11] E120 MFD will not start - seeray96 - 11-21-19, 12:41 PM

RE: [DG11] E120 MFD will not start - Louise - Raymarine - Moderator - 11-22-19, 10:31 AM

RE: [DG11] E120 MFD will not start - seeray96 - 11-22-19, 11:27 AM

RE: [DG11] E120 MFD will not start - Louise - Raymarine - Moderator - 11-25-19, 08:08 AM

RE: [DG11] E120 MFD will not start - seeray96 - 12-15-19, 07:15 PM

RE: [DG11] E120 MFD will not start - Louise - Raymarine - Moderator - 12-20-19, 10:06 AM

User(s) browsing this thread: 1 Guest(s)