Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autohelm AP into NMEA2000 integration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autohelm AP into NMEA2000 integration
11-07-19, 04:35 PM (This post was last modified: 11-09-19 08:41 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autohelm AP into NMEA2000 integration
Welcome to the Raymarine Forum Shipsngiggles,

Unfortunately, this long retired autopilot is no longer supported. Autopilot designs such as this preceded those which are supported for use with the SeaTalk to SeaTalkng Converter. Should either of the autopilot control heads feature a NMEA 0183 communications interface (I was unable to verify this from Raymarine's available online documentation), then you may want to try using this interface to in turn connect s third party chartplotting product which also supports NMEA 0183 communications. Finally, this autopilot may support a version of NMEA 0183 earlier than v2.0.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Autohelm AP into NMEA2000 integration - Chuck - Raymarine - Moderator - 11-07-19 04:35 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication