[CA] [CA11] Not understanding
|
11-11-19, 09:52 PM
(This post was last modified: 11-15-19 12:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] Not understanding
I purchased a new boat and am in process of installing the new electronics.
I bought the raymarine "boat in a box" which consists of an Axiom 12 RV, 9 RV , Ray 63 , HS5 switch and a multitude of conection cables and a stng 5 way connector. First, I understand I need to run a stand alone power supply and fuse panel. For this I plan to use a blue seas panel. I also need to run a shield wire for those connections. Here is where I'm lost. What is the HS5 switch for? With what I have is it needed? My instructions are vague, and the books that come with each unit only really show each unit as a stand alone system. If Raymarine sells this as a system they should include wiring diagrams as a system. Here is a link to what was purchased. https://rm.factoryoutletstore.com/detail...mid=636009 This is a brand new boat with no pre existing equipment. I may have misspoke when I said it was from Raymarine but so many stores carry this as a package. As far as other equipment that will be added. As of right now it would only be a Quantum Radar. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Not understanding - Wabowman - 11-11-19 09:52 PM
RE: [CA11] Not understanding - Chuck - Raymarine - Moderator - 11-15-19, 02:01 PM
RE: [CA11] Not understanding - Wabowman - 11-15-19, 03:57 PM
RE: [CA11] Not understanding - Chuck - Raymarine - Moderator - 11-15-19, 04:27 PM
|
User(s) browsing this thread: 1 Guest(s)