Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST60 wind, tested voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 wind, tested voltage
11-26-19, 11:45 AM (This post was last modified: 12-06-19 10:17 AM by Chuck - Raymarine - Moderator.)
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST60 wind, tested voltage
Welcome to the Raymarine Forum Curt,

As indicated within the FAQ found here, the masthead transducer's yellow and shield leads are used to test the speed sensing circuity of the transducer. Should the voltage not fluctuate as the cups are rotated in the manner specified within the referenced FAQ, then the wind transducer would be deemed to have suffered a failure.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60 wind, tested voltage - Chuck - Raymarine - Moderator - 11-26-19 11:45 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication