[CA] [CA11] DJI Mavic 2 Drone Support
|
12-05-19, 03:16 PM
(This post was last modified: 12-06-19 10:00 AM by Chuck - Raymarine - Moderator.)
Post: #10
|
|||
|
|||
RE: [CA11] DJI Mavic 2 Drone Support
Thank you for the reply. I can confirm this does not work.
On the regular remote control the port has communications enabled to talk to the dji go 4 application on an iOS/android device. Raymarine uses that same connection to connect to the remote control and the Raymarine app functions like a mock DJI Go 4 app. On the Smart remote controller you cannot use the usb-c port for that same two way communication. I also tried connecting my iPhone directly to the smart controller via the usb-c port and opening the dji go 4 app to see if it would communicate with the drone. It does not. So Mavic drones purchased with the Smart Controller will not work with the Raymarine app unless a workaround is found. At this time the only solution would be to purchase separately the original non-smart controller for $350 just to be able to use it with Raymarine. Bummer. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] DJI Mavic 2 Drone Support - gerard143 - 03-28-19, 12:18 AM
RE: [CA11] DJI Mavic 2 Drone Support - Chuck - Raymarine - Moderator - 03-28-19, 03:12 PM
RE: [CA11] DJI Mavic 2 Drone Support - gerard143 - 03-29-19, 10:21 AM
RE: [CA11] DJI Mavic 2 Drone Support - IBV - 05-24-19, 10:28 AM
RE: [CA11] DJI Mavic 2 Drone Support - Chuck - Raymarine - Moderator - 05-28-19, 02:10 PM
RE: [CA11] DJI Mavic 2 Drone Support - DIYglenn - 12-05-19, 05:16 AM
RE: [CA11] DJI Mavic 2 Drone Support - Chuck - Raymarine - Moderator - 12-05-19, 08:48 AM
RE: [CA11] DJI Mavic 2 Drone Support - gerard143 - 12-05-19, 09:52 AM
RE: [CA11] DJI Mavic 2 Drone Support - Chuck - Raymarine - Moderator - 12-05-19, 10:24 AM
RE: [CA11] DJI Mavic 2 Drone Support - gerard143 - 12-05-19 03:16 PM
RE: [CA11] DJI Mavic 2 Drone Support - DIYglenn - 12-06-19, 12:25 AM
RE: [CA11] DJI Mavic 2 Drone Support - Chuck - Raymarine - Moderator - 12-06-19, 09:59 AM
|
User(s) browsing this thread: 3 Guest(s)