Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST60 wind, tested voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 wind, tested voltage
12-06-19, 10:28 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST60 wind, tested voltage
Welcome to the Raymarine Forum Mark,

Testing for speed voltage would typically require that the transducer's cups be rotated slowly by hand. However, should the oscilloscope have been able to freeze the squar wave and should you have observed the voltages reported, then it would indicate a failure within the masthead transducer's speed sensing circuitry necessitating that the transducer be unplugged from its masthead base and sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60 wind, tested voltage - Chuck - Raymarine - Moderator - 12-06-19 10:28 AM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication