[CA] [CA11] Tacktick Micronet

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum Dave,

While it is possible for a MFD running LightHouse 3 v3.11.42 or later software to calibrate an analog instrument transducer which has been interfaced to an iTC-5 Analog Instrument Converter, it is not possible to calibrate Tack Tick instrument transducers via a MFD. Additionally, the Micro-Talk Gateway is not designed to communicate directly with the wind transducer, but instead with the system's wireless displays (see the Autonetworking — compatible Micronet displays section of Chapter 6.2: Autonetworking of the Micro-Talk Gateway Installation Instructions). Accordingly, the MN100 would need to remain within the system or be replaced with another compatible Tack Tick product identified within the aforementioned compatible Micronet displays section of Chapter 6.2 of the Micro-Talk Gateway Installation Instructions.