The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] i60 wind issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] i60 wind issues
02-01-20, 01:14 AM (This post was last modified: 02-03-20 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
Lajimo Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2020
Reputation: 0
Wink [CA11] i60 wind issues
My i60 wind system started working intermittently and then just stopped working entirely. The display panel powers up but the needle is frozen at 0 degrees and three dashes show for speed. As recommended elsewhere in the forum I’ve verified voltages at the mast harness connector and the connection to the back of the panel. All are within the required ranges, and connections are good. The top of mast indicator is working well - ie spins and aligns with wind direction and connection there is also good. So I conclude the problem is. With the i60 unit itself. Is it worth sending in for repair or better to just replace it?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] i60 wind issues - Lajimo - 02-01-20 01:14 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication