Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Axiom Pro not recognizing external GPS

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom Pro not recognizing external GPS
02-04-20, 01:47 PM (This post was last modified: 02-04-20 02:24 PM by Chuck - Raymarine - Moderator.)
Post: #5
rfadler Offline
Junior Member
**
 		Posts: 10
Joined: Oct 2017
Reputation: 0
RE: [CA11] Axiom Pro not recognizing external GPS
Thank you for the detailed instructions.

The power switch on the ACU400 was in the OFF position. I tested both terminators and are both 120 ohms. Checked all connections and moved the power source from one side of approximately the center to the other side of approximately the center. All the cables are in good shape.

I'm attaching two files, one is the complete device list which includes the Maretron GPS200 which has a name of "3.0" which I'd say is odd. The serial number for the GPS device contains the string "GPS200".

I'm also including the log file you requested. In the log file viewer on the MFD I can see COG and other navigation related messages from device 3.0 so the MFD can "see" the messages. For some reason it doesn't list the device as a source of GPS data.

Thanks for your help.


Attached File(s)
.log  nmea2000_20200204_18.log (Size: 200.08 KB / Downloads: 222)
.json  Diagnostics_Device_List.json (Size: 6.05 KB / Downloads: 199)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro not recognizing external GPS - rfadler - 02-04-20 01:47 PM

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication