The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] [CA11] System Upgrade and Integration

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] System Upgrade and Integration
02-22-20, 01:58 AM (This post was last modified: 02-24-20 12:56 PM by Chuck - Raymarine - Moderator.)
Post: #1
SableFalcon Offline
Junior Member
**
 		Posts: 4
Joined: Feb 2020
Reputation: 0
[CA11] System Upgrade and Integration
Our current set of electronics is a mix of manufacturers. We have an ST60+ for Wind (along with the Raymarine wind transducer), a Standard Horizon DS45 Depth meter with DST50 transducer, and a knot log (whose brand I can't remember, but has a broken transducer). We also have an ST7000+ Autopilot control unit and a Type 300 autopilot control unit. The chart plotter is a Garmin 741. Radar is a Furuno 1621 Mark 2.

The intent is to keep the autopilot, and upgrade everything else in two phases. The first phase would be to replace the ST60+, the DS45, and knot log with i70s MFDs. I know I need to use the iTC5 for this, but my question is - can I keep the DST50 and the wind transducer, and just add a new speed transducer?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] System Upgrade and Integration - SableFalcon - 02-22-20 01:58 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication