The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Networking / System Integration v / [TG] Gs165 connection to SeatalkHs

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Gs165 connection to SeatalkHs
02-26-20, 04:48 PM (This post was last modified: 02-27-20 12:51 AM by Tom - Raymarine - Moderator.)
Post: #1
Tinacious Offline
Junior Member
**
 		Posts: 1
Joined: Oct 2019
Reputation: 0
Gs165 connection to SeatalkHs
We are replacing our (2) e140w's with (2) Gs165's. We have a CP370 (D/S) and a VCM 100 (Radar) operating on the Seatalk Hs network. And an ACU 400 (auto pilot), St70+ keypad and display on the Seatalk NG network. The two networks (HS and NG) used to integrate through the e140's (one cable from each network to the e140) We want to integrate the two systems again, but the Gs165 only has one NG port.
How do you connect the two networks? Can you connect the HS network switch directly to a 5-way NG connector using the A62360 Adaptor Cable?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Gs165 connection to SeatalkHs - Tinacious - 02-26-20 04:48 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication