[CA11] Replacing an E80 Classic with an Axiom 9

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Replacing an E80 Classic with an Axiom 9

03-02-20, 10:22 AM

Post: #3

Spiderjohn Offline

Junior Member

Posts: 4
Joined: Oct 2019
Reputation: 0

RE: [CA11] Replacing an E80 Classic with an Axiom 9

Chuck,
Thanks for the help. I've dug into the wiring on the existing system and found the AIS650 and VHF are connected to the E80 via the the NEMA 0183 connection. The ST70 Pilot, SPX, St70 Instrument and Airmar Multisensor are all connect to the E80 via SeatalkNG. The Digital radar is is connected to the SR6 which in turn conncets to the E80 via SeatalkHS.

I plan to abandon the NEMA 0183 circuit and connect the AIS as a spur on the backbone. That leaves the SR200 and radar. How should these two devices be connected? Is there an adapter or will I need a switch?

Barry Brookshire

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 02-19-20, 03:00 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 02-20-20, 01:54 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 03-02-20 10:22 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 03-02-20, 11:06 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 03-03-20, 08:58 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 03-03-20, 03:11 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 04-13-20, 04:05 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 04-13-20, 04:51 PM

User(s) browsing this thread: 1 Guest(s)