[CA11] Axiom chartplotter with SPX 5 autopilot

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Axiom chartplotter with SPX 5 autopilot

03-02-20, 02:49 PM (This post was last modified: 03-05-20 09:59 AM by Chuck - Raymarine - Moderator.)

Post: #1

Artemis Offline

Junior Member

Posts: 2
Joined: Aug 2018
Reputation: 0

[CA11] Axiom chartplotter with SPX 5 autopilot

My boat currently has an Axiom chartplotter, an ST6002 and an SPX5 autopilot. Currently the ST6002 and SPX5 are connected via Seatalk. I would like to replace the ST6002 with a P70 and replace the Seatalk wiring with Seatalk NG.

The SPX5 computer is currently on software version v3.00. Looking at the software history, it looks like the SeaTalk NG compatibility features were added in v3.00. Will I be okay with this setup, or does it need to be updated to v3.05?

Thanks!

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Axiom chartplotter with SPX 5 autopilot - Artemis - 03-02-20 02:49 PM

RE: [CA11] Axiom chartplotter with SPX 5 autopilot - Chuck - Raymarine - Moderator - 03-05-20, 09:58 AM

User(s) browsing this thread: 1 Guest(s)