[CA11] Replacing an E80 Classic with an Axiom 9

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Replacing an E80 Classic with an Axiom 9

03-03-20, 03:11 PM (This post was last modified: 03-03-20 03:12 PM by Chuck - Raymarine - Moderator.)

Post: #6

Chuck - Raymarine - Moderator Offline

Administrator

Posts: 14,319
Joined: Oct 2014
Reputation: 43

RE: [CA11] Replacing an E80 Classic with an Axiom 9

Barry,

Q. So I canâ€™t interface the SR200 and Radar directly to the backbone without an Ethernet switch?
A. It is not possible to do as you have suggested. The SR200 and currently produced radar transducer are designed to support Ethernet communications. Such devices cannot be adapted to be mated to a SeaTalkng / NMEA 2000 backbone. As the Axiom MFD features a single Ethernet Network socket (RayNet) and more than device having an Ethernet communications interface will need to be connected to the MFD, an Ethernet switch (i.e. HS5 RayNet Network Switch) will be required.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 02-19-20, 03:00 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 02-20-20, 01:54 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 03-02-20, 10:22 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 03-02-20, 11:06 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 03-03-20, 08:58 AM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 03-03-20 03:11 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Spiderjohn - 04-13-20, 04:05 PM

RE: [CA11] Replacing an E80 Classic with an Axiom 9 - Chuck - Raymarine - Moderator - 04-13-20, 04:51 PM

User(s) browsing this thread: 1 Guest(s)