[CA] [CA11] Linear rudder reference transducer setup

[bellinghamangler]

I'm running an EV150 with P70r. I'd like to add more information to this post. I'm also running a seastar Smartstick rudder transduce as I was unable to adapt my Raymarine transduce when I moved to an outboard. I seem to be having problems with that as well. When I run the dockside wizard, as I manually turn the rudder to port, the red indicator bar on the p70 indicates to starboard. After the manual rudder movement part of the dockside wizard, the autopilot tries to move the motor, but stops and gives me an inconsistent values error. I removed the rudder indicator from the EV150 and was able to complete the dockside wizard. It would be helpful to know what the EV150s colored ports on the rudder indicator actually do (power, ground, signal) so that I can make sure the smartstick is properly wired up.