Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] ST60 wind, tested voltage

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST60 wind, tested voltage
03-21-20, 09:00 AM (This post was last modified: 03-23-20 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #11
gk1978c34 Offline
Junior Member
**
 		Posts: 3
Joined: Mar 2020
Reputation: 0
RE: [CA11] ST60 wind, tested voltage
What should yellow measure at back of ST60 with only Red power attached? I am reading 8V on yellow and assume that indicates that my ST60 wind instrument is bad and would like confirmation. With only Red attached and measuring at base of mast I get these readings:

R: 8V
G: 2-6V
B: 2-6V
Y: 0V

Yellow at base of mast always reads 0V when only Red from ST60 wind instrument is attached.

I am assuming that my ST60 wind instrument is bad with Yellow reading 8V and that it fried my masthead wind transducer and would like confirmation before replacing both.

Thank you
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST60 wind, tested voltage - gk1978c34 - 03-21-20 09:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication