[TG] [TG11] ECI-100 & STW

[Tom - Raymarine - Moderator]

Hi Bernie,

I think the thinking on the diagnostic display output is that if you don't know much of what you're looking at then message titles are more useful than (decimal) PGNs, whereas if you do know what you're doing you probably want raw, raw data, including source address etc.. We don't do a middle ground.

On the website - we are transitioning some parts of the site I believe and have had some things break, sorry about that. You can go to Products > Instruments > ITC5 / Transducers, down at the bottom.

On the Yamaha - I do think it would be worth trying to temporarily bypass the ECI and see what you're getting direct on the engine network. That would confirm whether it's the ECI not passing it through, or it not being present (in standard data) in the first place.

Tom