European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[TG] Raystar 125 GPS seatalk and NMEA
/
[TG] Raystar 125 GPS seatalk and NMEA
|
[TG] Raystar 125 GPS seatalk and NMEA
|
|
05-01-20, 10:08 PM
(This post was last modified: 05-05-20 12:28 AM by Tom - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
|
Raystar 125 GPS seatalk and NMEA
I am adding a E90W plotter beside my old system that includes a Pathfinder RL70C and a Raystar 125 GPS receiver connected by SeaTalk.
I would like to split the GPS data separately to both units without networking them. My question is, can I leave the SeaTalk connection in place and simply run an NMEA 0183 connection from the R125 wires to the NMEA port on the E90W? Or do I need to replace the SeaTalk cabling to the RL70C with NMEA wiring from the R125? Advice much appreciated. |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Raystar 125 GPS seatalk and NMEA - AndrewP - 05-01-20 10:08 PM
RE: Raystar 125 GPS seatalk and NMEA - Tom - Raymarine - Moderator - 05-05-20, 12:33 AM
|
User(s) browsing this thread: 2 Guest(s)