The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] DSM 300 Depth not displaying

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] DSM 300 Depth not displaying
05-06-20, 01:02 PM (This post was last modified: 05-08-20 01:48 AM by Tom - Raymarine - Moderator.)
Post: #1
rpdeines Offline
Junior Member
**
 		Posts: 2
Joined: May 2018
Reputation: 0
DSM 300 Depth not displaying
Hello,

i have c80 classic, with DSM300 and P319 transducer. It is on an aluminum boat where the transducer is a thru hull centerline to the main outboard (16" inward of the transom, and 48" from the outboard gear case).

The depth will read a most of the time, but it stops reading occasionally when I need to know the depths when setting shrimp pots 400-600 ft. It just flashes --. During this time I'm generally moving slow (3 to 7 knots)

I upgraded the main supply cable to the fused panel from 10 gauge to 4 gauge a few years ago.

If I can't fix this I'm considering upgrading to the Axiom model. Could the thru hull transducer be replaced or would I need to go to transom mount? Best transom mount location?

Thanks

Ryan


Attached File(s) Thumbnail(s)
                       
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DSM 300 Depth not displaying - rpdeines - 05-06-20 01:02 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication