Raymarine forum / Raymarine Forums / Multifunction Displays v / [TG] [TG11] RS130 External Antenna with Axiom Pro?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] RS130 External Antenna with Axiom Pro?
05-13-20, 01:46 AM
Post: #2
Tom - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,067
Joined: Nov 2017
Reputation: 7
RE: [TG11] RS130 External Antenna with Axiom Pro?
Hello Grady330,

Yes, an RS130 will work fine with Axiom Pro. If you didn't already have an antenna I would suggest the GA150 passive antenna (suitable for Axiom Pro but not standard Axiom, for anyone else reading this) which is lower-cost than an active NMEA2000 antenna, but since you have the RS130 there's no problem using that.

Regards,
Tom
Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] RS130 External Antenna with Axiom Pro? - Tom - Raymarine - Moderator - 05-13-20 01:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication