The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [DG] [DG11] connection to Furuno radar

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] connection to Furuno radar
05-13-20, 01:29 PM (This post was last modified: 05-14-20 06:05 AM by Derek - Raymarine - Moderator.)
Post: #1
clivebuller Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2020
Reputation: 0
[DG11] connection to Furuno radar
I have recently purchased a Raymarine Axiom MFD and would like to connect my radar to it as I understand on reading the documentation that the Furuno radar model 1621 (which I already have installed on my boat) outputs NMEA 0183 data. I thought that all I would need is a device to convert NMEA 0183 to either NMEA 2000 or SeaTalk (which Raymarine use) to connect to my Raymarine device but I have been told that it may not be as straightforward as that and may not even be possible depending on what the output from my Foruno radar gives. Do you have any experience of doing this and if so, could you let me know what I would need to achieve this please.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG11] connection to Furuno radar - clivebuller - 05-13-20 01:29 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication