The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [TG] [TG11] Fuel Flow Meter Displayed to Axiom Pro

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Fuel Flow Meter Displayed to Axiom Pro
05-16-20, 05:27 PM (This post was last modified: 05-20-20 01:46 AM by Tom - Raymarine - Moderator.)
Post: #1
Errin Offline
Junior Member
**
 		Posts: 2
Joined: May 2020
Reputation: 0
[TG11] Fuel Flow Meter Displayed to Axiom Pro
Hello,

I am running a new Raymarine Axiom Pro 9 in the boat and looking for a fuel flow meter device that will utilize the NMEA 2000 connection so the fuel consumption data can be viewed on my MFD. I have done several google searches and I can't find anything that pairs a fuel flow meter to a Raymarine MFD. I have also combed the Raymarine website to no avail.

I am hoping to avoid needing a new, separate gauge for the fuel flow display. Why pay all that money and not be able to project fuel data on the MFD screen?

Boat is a Cabo 216 with a Yamaha 175 Two-stroke (1991). I'm getting about 2 mpg but am taking long trips and want to be able to manage my fuel use a little more accurately.

Any input is appreciated, thank you.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] Fuel Flow Meter Displayed to Axiom Pro - Errin - 05-16-20 05:27 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication