[TG] [TG11] Help with Axiom Upgrade
|
06-01-20, 02:37 AM
Post: #2
|
|||
|
|||
RE: [TG11] Help with Axiom Upgrade
Hello aporto,
Quote:I ordered an Axiom 9 with charts and C80 back plate. If you're using the adaptor plate, you will need an external GPS I'm afraid. The adaptor plate (for robustness and appearance) is anodised alloy and will block the GPS signals of the internal receiver. Quote:***Since there is no hookup on the c80 for depth sounder, I assume it is connected to the ST60 and by connecting ST60 to backbone, the backbone will have access to that data? Yes, if you use the E22158 ST1-STNG convertor and a Devicenet-STNG adaptor cable, that will share all compatible data - including depth - between the ST60s and Axiom, and is a fully functional backbone. Quote:I currently own Standard Horizon (DSC) with an older connection I assume is 1083. Raymarine suggested I purchase Actisense converter - NGW-1-STNG to connect current VHF. would this connect into the Raymarine Seatalk1 to Sea Talk-Ng Converter linked above? Will I need to purchase a second product or can I use the same backbone for ST60 listed above? To use an existing NMEA0183 VHF you'd need the Actisense or equivalent, or you could of course replace the VHF with a SeatalkNG/NMEA2000 model, which is I think what I'd recommend. If you used the existing VHF then you can connect the NMEA0183-NMEA2000 interface to SeatalkNG via another one of the Devicenet-STNG adaptor cables you've already ordered (our part A06075.) To add an AIS as well later on, you'd need an extra spur socket in your backbone, which would entail a backbone cable and STNG 5-way junction block or T-piece. Quote:***If I plan on purchasing AIS transmitter and Axiom has built-in GPS, the only feature I should need on VHF is DSC, correct? Yes, excepting my comment above about the Axiom's internal GPS and the adaptor plate. Regards, Tom Raymarine since 1999. Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras Location: Sydney, Australia. Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] Help with Axiom Upgrade - aporto - 05-26-20, 10:21 AM
RE: [TG11] Help with Axiom Upgrade - Tom - Raymarine - Moderator - 06-01-20 02:37 AM
|
User(s) browsing this thread: 1 Guest(s)