The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / E90W SEATALKng communication issues

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
E90W SEATALKng communication issues
07-07-16, 05:59 PM
Post: #1
onewadd Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2016
Reputation: 0
E90W SEATALKng communication issues
I have added a EV-1 autopilot with P70 control head and P60 wind control head to an existing E90W MFD and RS130 gps. If I connect the STng in/out of the MFD all communication between the units fails and nothing shows as connected on the P70. If I remove the E90W from the backbone then the P70 shows communication with the RS130, EV-1 unit, P60 wind. If I connect the E90W to the backbone it will see the RS130 as GPS signals but I get nothing readable in "system diagnostics" for STng on the E90W and all the other communication fails. It looks to me like the issue in within the E90W. Thoughts??
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E90W SEATALKng communication issues - onewadd - 07-07-16 05:59 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication