The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / PC & Mobile v / RayRemote & RayViewer App Stuck on View Only Mode

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RayRemote & RayViewer App Stuck on View Only Mode
07-12-16, 02:31 PM
Post: #1
jefndeb Offline
Mainship 400
***
 		Posts: 54
Joined: Feb 2016
Reputation: 0
RayRemote & RayViewer App Stuck on View Only Mode
Chuck,

I have been unable to get my RayRemote & RayViewer apps to interact/control the e7 MFD v16.47. I read that under wi-fi sharing menu there is a setting where this function is enabled or disabled. I thought for sure mine had been accidentally set as disable but it was enabled.

My plotter was set to share but all the app does is mirror the display as if the wi-fi sharing has been disabled,

I changed the setting a few times and rebooted a few times but I could never get the app to function such as panning around etc. ..

any suggestions?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RayRemote & RayViewer App Stuck on View Only Mode - jefndeb - 07-12-16 02:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication