The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / ST 50 Plus Transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST 50 Plus Transducer
07-21-16, 10:22 PM
Post: #1
B310Racer Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2016
Reputation: 0
ST 50 Plus Transducer
I have an Autohelm ST50 Plus Tridata head unit. My depth works fine. My speed is intermittent to non existent. I read the post titled ST50+ Tridata and plan to run the test shown there on the paddlewheel.

I do not know the part number of the transducer - Can you identify from the attached photo? The cable shows "Airmar Transducer Cable #C9 C1225" but there are no markings that I can see on the transducer itself.

Questions are:
1. If the paddlewheel is not showing correct function with the Ohm meter, are there replacement parts available to replace/rebuild the paddlewheel portion of the sender? part Numbers please.
2. If not, what sender is the correct unit to replace mine without having to replace the through hull? part Numbers, please.

Appreciate your replies.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST 50 Plus Transducer - B310Racer - 07-21-16 10:22 PM
RE: ST 50 Plus Transducer - B310Racer - 07-22-16, 02:39 PM
RE: ST 50 Plus Transducer - B310Racer - 07-22-16, 03:51 PM
RE: ST 50 Plus Transducer - B310Racer - 07-25-16, 01:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication