Raymarine forum / Raymarine Forums / Multifunction Displays v / a65 Touch Screen set up

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a65 Touch Screen set up
07-26-16, 08:53 AM (This post was last modified: 07-26-16 08:58 AM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: a65 Touch Screen set up
Welcome to the Raymarine Forum Will,

Please click here to view a FAQ addressing this subject. It is quite likely that your engine supports Mercury Marine's SmartCraft communications technology. If so, then a SmartCraft to NMEA 2000 Gateway would need to be purchased from a Mercury Marine dealer along within any other SmartCraft networking components required to connect the SmartCraft to NMEA 2000 Gateway to the engine system. The SmartCraft to NMEA 2000 Gateway may be interfaced to the SeaTalkng backbone via an A06075 1m DeviceNet (F) to SeaTalkng Spur Cable. Questions concerning how to connect the SmartCraft to NMEA 2000 Gateway to your boat's engine system should be addressed to Mercury Marine.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
a65 Touch Screen set up - Will - 07-24-16, 02:51 PM
RE: a65 Touch Screen set up - Chuck - Raymarine - Moderator - 07-26-16 08:53 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication