Raymarine forum / Raymarine Forums / Autopilots v / SmartPilot error to Classic E120 Chartplotter

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SmartPilot error to Classic E120 Chartplotter
08-09-16, 08:18 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: SmartPilot error to Classic E120 Chartplotter
Welcome to the Raymarine Forum cjfrench,

You may be confusing the meaning of the Autopilot Control icon. When interfaced via SeaTalk or SeaTalkng to a compatible Raymarine autopilot AND the MFD's Autopilot Control feature has been enabled, the red X will be removed from the autopilot icon within the transducer status data item if the MFD senses the presence of the autopilot. Accordingly, it is recommended that you verify that the MFD's Autopilot Control feature has been enabled and that the autopilot has been powered ON.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: SmartPilot error to Classic E120 Chartplotter - Chuck - Raymarine - Moderator - 08-09-16 08:18 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication