The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / No Data Source" - Digital/HD Digital Radome and HD/Super HD Radar Pedestal

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
No Data Source" - Digital/HD Digital Radome and HD/Super HD Radar Pedestal
08-18-16, 10:36 PM (This post was last modified: 08-19-16 09:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
Scharpfy Offline
Junior Member
**
 		Posts: 4
Joined: Aug 2016
Reputation: 0
No Data Source" - Digital/HD Digital Radome and HD/Super HD Radar Pedestal
The radar shuts down for no reason, then it will not reconnect unless the switch on the radar is turned off then back on. I upgraded the software to 17.45 and the guts of the radar has been sent in to Raymarine and the entire base was also sent in on a second try, your technical repair person found nothing wrong with it either time. I purchased the SHD Radar and a C125 this past February. It has never worked.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
No Data Source" - Digital/HD Digital Radome and HD/Super HD Radar Pedestal - Scharpfy - 08-18-16 10:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication