Complete my i70 install

[Chuck - Raymarine - Moderator]

Sfkjeld,

Per my initial response,
Q1) 1. SOG (assume is a GPS device)
A1) Per my last response, should GPS SOG need to be displayed on the i70 MFID, then it is recommended that an E32153 Raystar 130 GPS Sensor be interfaced as a spur to the powered and properly terminated SeaTalkng backbone to which the i70 MFID will also been interfaced as a spur.

Q2: Depth finder thru hull transducer
A2: Raymarine has not offered Depth-Only Smart Transducers and no longer offers Depth/Temp Smart Transducers. Although the previously referenced DST800 Smart Transducer additionally includes speed and temp, it is the least expensive option. While an analog depth transducer of lower cost may be added to the system, it will require that an iTC-5 Analog Instrument Transducer Converter be installed as well. The total cost of these two items (iTC-5 and analog depth transducer) will exceed that of the DST800 Smart Transducer. Accordingly, it is recommended that an A22111 Depth/Speed/Temp Smart Transducer be installed and interfaced as a spur to the SeaTalkng backbone.