Raymarine forum / Raymarine Forums / Instruments v / i50 depth sounder to replace an ST 60 D S

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
i50 depth sounder to replace an ST 60 D S
08-25-16, 04:24 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: i50 depth sounder to replace an ST 60 D S
Welcome to the Raymarine Forum Jeff,

Actually, the interfaces of the i50/i60 instruments will support either SeaTalkng or SeaTalk communications protocols. These instrument displays are packaged with a SeaTalkng to SeaTalk Cable. To interface the i50/60 instrument in place of the ST60 instrument, the SeaTalk cable will be to be unplugged from the ST60 instrument and instead connected to a D244 SeaTalk Junction Block. The SeaTalkng to SeaTalk Cable supplied with the i50/i60 instrument will then be used to mate the i50/i60 instrument to the D244 SeaTalk Junction Block.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: i50 depth sounder to replace an ST 60 D S - Chuck - Raymarine - Moderator - 08-25-16 04:24 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication