Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DCS interface to MFD
09-13-16, 03:27 PM (This post was last modified: 09-14-16 07:16 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: DCS interface to MFD
Hello Chuck

I'm sure the MDF ports are good. The Radio received GPS from MDF. Also, when I connected the Airmar weather station to MDF (same port 2), The MDF received wind direction ..etc. So the ports on MDF are good. The only problem is to verify if the Radio is capable to transmit anything to the MDF.

I also enabled the DSC message on the MDF.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
DCS interface to MFD - Pdog1989 - 04-26-16, 12:18 PM
RE: DCS interface to MFD - HiViet - 09-11-16, 04:17 PM
RE: DCS interface to MFD - HiViet - 09-13-16 03:27 PM
RE: DCS interface to MFD - HiViet - 09-19-16, 02:42 PM
RE: DCS interface to MFD - HiViet - 09-22-16, 01:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)