The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / Airmar H2183 connection via STNg to slaved e95

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Airmar H2183 connection via STNg to slaved e95
11-28-16, 02:50 PM
Post: #1
Pavetwist Offline
Junior Member
**
 		Posts: 5
Joined: Nov 2016
Reputation: 0
Airmar H2183 connection via STNg to slaved e95
I purchased the Airmar H2183 and will install into my current Raymarine architecture. I am running dual e95s, SR6 network, and one backbone kit. Based on my current software for the e95s (believe 14.xx or 15.xx) I should be able to connect the Airmar H2183 via 0183 or STNg. I would like to connect via STNg, but the only port I have available (without buying a second backbone and associated cabling) is into the slaved e95 as my current backbone goes into master e95 via STNg spur. My question is, if this will work or should I go with a second backbone or lastly connect via 0183?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Airmar H2183 connection via STNg to slaved e95 - Pavetwist - 11-28-16 02:50 PM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication