Adding EV100 to Seatalk network

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

Adding EV100 to Seatalk network

01-19-17, 05:55 PM (This post was last modified: 01-20-17 10:25 AM by Chuck - Raymarine - Moderator.)

Post: #3

Bikerbob Offline

Junior Member

Posts: 15
Joined: Aug 2016
Reputation: 0

RE: Adding EV100 to Seatalk network

Thanks for your response Chuck. I did already figure out that I could not just use a cable anymore that the converter kit is the way to go. I am modifying my diagram to suit. I will look at your software issue post - this is to interface with ST60 or ST1 data?

As for the 441s I just realised that I have a 440s - so no nmea2000 just 0183. So I will have to continue to use the nmea / seatalk bridge.

I will post my diagram for anyone who wants to see it.

James

« Next Oldest | Next Newest »

Messages In This Thread

Adding EV100 to Seatalk network - Bikerbob - 01-18-17, 08:22 PM

RE: Adding EV100 to Seatalk network - Chuck - Raymarine - Moderator - 01-19-17, 11:19 AM

RE: Adding EV100 to Seatalk network - Bikerbob - 01-19-17 05:55 PM

RE: Adding EV100 to Seatalk network - Bikerbob - 01-20-17, 11:32 AM

RE: Adding EV100 to Seatalk network - Chuck - Raymarine - Moderator - 01-20-17, 10:26 AM

RE: Adding EV100 to Seatalk network - Chuck - Raymarine - Moderator - 01-20-17, 12:04 PM

RE: Adding EV100 to Seatalk network - Bikerbob - 01-20-17, 05:02 PM

RE: Adding EV100 to Seatalk network - Chuck - Raymarine - Moderator - 01-23-17, 10:08 AM

User(s) browsing this thread: 3 Guest(s)