The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Marine Cameras v / Cam210IP Installation

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cam210IP Installation
02-27-17, 01:38 PM
Post: #1
Trawlerboat Offline
Junior Member
**
 		Posts: 10
Joined: Feb 2016
Reputation: 0
Cam210IP Installation
I am investigating installing the 210IP Camera into our current system. The system has a HS Network Switch with available RJ45 ports. MFD's are es127 and an eSeries.

Cable Run is about 30 ft.
1. Can I run shielded RJ45 male to Male cable from the HS Network Switch to the Camera?
2. Should I run 16 gauge Red/Black Power Cable?
3. Will the pigtail on the camera connect both the RJ45 and the Power Cable?
4. Should I have a separate power switch for the camera?

Any other recommendations would be appreciated.

Thank You

Barry
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Cam210IP Installation - Trawlerboat - 02-27-17 01:38 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication