[CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer

[Chuck - Raymarine - Moderator]

Welcome to the Raymarine Forum justinJPW,

Any of the following may be installed to support the end the autopilot's Wind Vane Mode:

- E70150 i60 Wind Pack (includes i60 Wind instrument and masthead transducer). The i60 Wind Instrument Display will need to be interfaced a to a spur socket within the SeaTalkng backbone via an appropriate length of SeaTalkng Spur Cable.

or

- E70327 i70S Multifunction Instrument Display, E70010 iTC-5 Analog Instrument Converter, and E22078 (30m) Short Arm Wind Vane Transducer. The iTC-5 will need to be interfaced to the SeaTalkng backbone via an appropriate length of SeaTalkng Backbone Cable. The i70S will need to be interfaced to the backbone via an appropriate length of SeaTalk Spur Cable.

Should one need to add additional spur sockets to the SeaTalkng backbone to accommodate these additional products, the Please click here to view a FAQ addressing this subject.