Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer
03-02-17, 10:55 AM (This post was last modified: 03-02-17 11:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
justinJPW Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2017
Reputation: 0
RE: Interface EV-100 Sail to Raymarine wind transducer
Chuck

Many thanks for this excellent advice - I will also review the suggested link about how the SeaTalk Spur Cable is configured. I'm assuming, if I have appropriately installed my EV-100, that I do have a "powered and properly terminated SeaTalk backbone" as referenced in that spur cable link! This is the only instrumentation I have apart from some Autohelm ST50 Depth and Log - is there any benefit to them connecting in here?

Thank you for this clarification. Much appreciated!!

jp
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interface EV-100 Sail to Raymarine wind transducer - justinJPW - 03-02-17 10:55 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication