Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Interface EV-100 Sail to Raymarine wind transducer
03-06-17, 06:17 PM
Post: #11
justinJPW Offline
Junior Member
**
 		Posts: 8
Joined: Feb 2017
Reputation: 0
RE: Interface EV-100 Sail to Raymarine wind transducer
Chuck

E70150 i60 Wind Pack

Is there any issue severing and adding connectors to the transducer cable?
(Wind transducer (E22078) with 100 ft. cable )

We often remove the mast over winter for component servicing - so for simplicity need to disconnect/reconnect that cable at deck.

Can I break and add connectors about 40 feet from the transducer? If so do you recommend connectors - they would need to be seriously watertight - IPV6 at least!

thank you



jp
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interface EV-100 Sail to Raymarine wind transducer - justinJPW - 03-06-17 06:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication