Raymarine forum / Raymarine Forums / Instruments v / Raystar 125 to NMEA 2000

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Raystar 125 to NMEA 2000
04-04-17, 11:00 AM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: Raystar 125 to NMEA 2000
Welcome to the Raymarine Forum Travis,

As the Raystar 125 GPS Sensor is designed to support either SeaTalk (not SeaTalkng) or NMEA 0183 communications depending on the method of installation, it would need to be adapted (ex. Actisense NGW-1-ISO, etc.) to be interfaced to a SeaTalkng / NMEA 2000 backbone. It is further recommended that the E-Series Classic MFD be updated with the E-Series Classic MFD v5.69 software update when being interfaced to a SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Raystar 125 to NMEA 2000 - Chuck - Raymarine - Moderator - 04-04-17 11:00 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication